During 1954 the Ghibli 125 U was introduced, similar to the Monsone...
Introduced at the Milan Show of November 1955, the Chimera was quite a sensation with its relatively powerful horizontal fourstroke engine, sleek enclosed bodywork, and monocross suspension - a system not seen on other production machines until decades later. The machine's designer, Alfredo Bianchi, already had a long list of credits for notable machines penned for Astoria and Parilla, and the success of this one was immediate. Production began in 1956 and continued until 1961.
More information: Chimera 175
The 1961 Model C Sprint was the first product imported to the United States as a result of the agreement between Aermacchi and Harley-Davidson.
A horizontal 250cc four-stroke OHV engine powered this lightweight. It has an alloy cylinder head with 9:1 compression ratio developing a claimed 18 horsepower at 7,500 rpm. It was fitted with a 4 speed gearbox with gearshift on the left, something of a trap for the American rider to get used to prior to the Japanese onslaught.
1961 250cc Wisconsin / Sprint 250CH
This 48cc machine came as a moped, the 48NP (P for pedals) and without pedals, a no-ped, hence 48N with no P. (Yeah, right!)
The engine is 38x42mm, plain piston-port, CR 8.5:1, with 3 speeds actuated by a hand shift. The 48NP was built until 1965 with much of the production going to the Italian market, whilst the 48N continued on until 1972.
The M-50s two-stroke engine developed 2.5 horsepower from 50ccc, delivering power via a thre-speed gearbox. Gear shift was scooter-style via a cable from the handgrip. Built on Lake Varese in the Aermacchi factory this was Harley-Davidson's smallest ever motorcycle
The tiddler weighed 103 pounds, had a 1.6-gallon petrol tank, had reasonable fuel economy and sold for a mere for $225.00.
Around 9,000 M-50 models were produced in 1965.
Fitted with a 4-speed gearbox and the engine of the Azzurra, the model was built in small quantities for one year only.
A GT model also appeared with a 5 speed box. The Ala Blu GT 250-M remained in the product lineup until 1972, and in total somewhat more than 725 machines were manufactured.
The development of the 125cc Ala d'Oro began in 1966 with the prototype raced in 1967. It had a with a bore and stroke of 56x50mm and developed 10 horsepower more than its predecessor.
The already attractive machine was further developed through the 1968 season and the first production racers appeared on the dealers showroom floors in 1969.
207 Ala d'Oro 125s were produced.
Specification
Ala d'Oro 125 1969-1972 123 cc single cyl. 56 x 50 mm, two-stroke 20 h.p. @ 10.800 rpm.
Towards the end of 1966 Aermacchi began the development of a 125 two-stroke engine, and a year later the Alleta 125 was displayed at the Milan Show. It was marketed in 1968 as the Turismo 125 and was fitted with a conventional piston-port engine of 56x50mm running on premix, as did almost all two-strokes of the day.
The frame was very similar to that of the Zeffiretto S and the M50/M65S models, with changes made to the rear end of the larger capacity bike.
Production ceased in 1970 after some 560 units had left the factory.
More information: Aletta 125
For the US market the Aermacchi Zeffiretto Sport 48S was titled simply M50S, and mildly restyled with typically high American-style handlebars and the removal of the toolboxes. The following year the larger M65S replaced the 48, with almost identical appearance.
The M-65S continued in the catalogs until 1970 when the Leggero "Mini Cycle" appeared, with a foot-operated gear change rather than hand change. Distribution of this model ceased in 1971.
1969 402 cc single cyl., 4-stroke
344 cc single cyl. 74 x 80 mm, 4-stroke 29 h.p. @ 7,500 rpm, 160 km/h
Based on the ML Rapido, the MSR was designed for off-road competition as befits its name. It was very much the same as the road-going SR-100, without lights, and the M in MSR is thought to have denoted Motocross.
Sold from 1970 to 1974, the machine had a 100cc two-stroke engine fed by a Dell'Orto MB-24A carburettor, and tyre sizes of 18" rear and 21" front.
More information: 1970 MSR 100 Baja
The Bicilindrica first appeared at the Modena circuit with Renzo Pasolini aboard for tests. It was developed by Alfredo Bianchi, technical director, ably assisted by William Soncini. Based on the 125 racing engine, it was two top ends on a common crankcase in parallel twin configuration in 250cc and 350cc versions. The barells were of 175cc capacity giving a total volume of just under 350cc. Both Pasolini and Walter Villa had wins on these machines.
The Shortster had the same engine as the Leggero fitted in a large diameter tubular frame from which the engine hung. Suspension was conventional front and rear, and it had alloy wheels and a dual seat. Quite high handlebars were fitted, along with lights and a speedometer, and an upswept exhaust.
In all, Harley's initial foray into the burgeoning minibike market was a very attractive offering. It was upgraded the following year with a 90cc 4-speed model, termed the X-90.
A road trail version of AMF's MSR, The SR100 shared its engine, chassis and much of the bodywork with the exception of the front guard and the addition of lights. It also had a high-low rear sprocket changing device allowing a fast change to lower gearing for off-road use.
The lightweight trailbike shared the specification of the MSR with a 100cc engine and Dell'Orto MB-24A carburettor, and tyre sizes of 18" rear and 21"
The X90 was based on the MC-65 Shortster, sharing many of its components including forks, wheels and fenders.
The engine was a 4 speed 90cc twostroke of 48x50mm and CR 1:9.22 with oil injection from a separate tank, the oil-pump being driven from the crankshaft.
The Z90 model was a larger machine, featuring a dual seat and lighting, using some electrical components common to the SS/SX models and the frame was similar to the SR100 Baja. This model was still available in some markets well into 1975.
Based on its predecessors the 125cc MLS and De Luxe, the Aermacchi HD TX125 had a revamped and stronger frame with a steel sump guard in place below the engine on the off-road model. Fitted with indicators for the US market, it had a 5 speed engine. The model suffered some criticism for gearbox problems and also body finish, and around 10,000 units were produced.
A development of the Sprint, the OHV 350cc SS was clearly up against it with all of the Japanese and European manufacturers offering a host of options, from Desmo Ducatis to Kawasaki Triples and of course Yamaha's all-conquering RD350. The Aermacchi offering was simply not in the race for although quite attractive it was, by comparison, deadly slow.
The machine offered a robust electrical system by ND with electric starting and a fair chunk of battery to run it, all housed in a new frame. There was a similar model available for off-road work, the SX-350.
Developed from the SX125 of 1974, it runs the same frame as the '75 SX175 and an upgraded 125cc engine, with compression increased to 10.8:1 (very high for a twostroke), 12hp (up from less than 10) and a larger Dell'Orto of 27mm choke.
A roadgoing edition of the SX175, the SS was powered by one of AMF's last two-strokes, a 175cc engine.
The SST-125 was presented with a five-speed gearbox, alternator, front disc-brake and oil injection. The machine was otherwise very similar to the earlier SS125.
Macchi 125N 1951-1954
Macchi 125 U / UL Ghibli 1953-1955
Zeffiro 125E 1955 to 1958
Zeffiro 150-1 1955-1958
Zeffiro 125-2 Series 2 1959-1961
Zeffiro 150-2 Series 2 1959-1961
Brezza 150 1963-1964
Sources: A. Vassiliadis, et al
If you have a query about Aermacchi motorcycles please contact us
