Puma Motorcycle Suspension by Ferlean

Featured Pages
Matchless Flat Twin 1916
An Outstanding Design by Harry Collier
Matchless 732cc HO Twin

Clement Ader
The Stuff of Legend
Pioneer in Telephony, Aviation and Motorcycling
Moteurs Ader

Guzzi's Grandpa
A shaft-drive transverse V-twin from 1904, another deft touch from Clement Ader.
Moto-Cardan

High quality photography of Vintage, Classic and Racing motorcycles. An introduction to his encyclopedic catalogue is available here:
Phil Aynsley's Motorcycle Portfolio

Today in Motorcycle History

Puma Motorcycle Suspension

Suspensión FERLEAN: Todas las motos PUMA 1ra y 2da serie, venían de fabrica con cuadro rígido trasero. Las suspensiones se compraban aparte y/o las vendían los mismo concesionarios. Los Hermanos dueños del taller donde se fabricaban estas suspensiones traseras se llamaban Fernando y Leandro Marttoglio y el taller estaba en la calle San Luis 318 y La Cañada en la ciudad de Cordoba. Este dato fue amablemente aportado por Norberto Peliza, ex-operario de dicho taller. Este accesorio se hacia utilizando la suspensión rígida original.

FERLEAN Suspension: All PUMA 1st and 2nd series bikes came from factory with rigid rear frame. The suspensions were bought separately and / or sold by the same dealers. The brothers who owned the workshop where these rear suspensions were made were called Fernando and Leandro Marttoglio and the workshop was located at Calle San Luis 318 and La Cañada in the city of Cordoba. This information was kindly provided by Norberto Peliza, ex-operator of the workshop. This accessory was made using the original rigid suspension.

Gilera

Paperino

Danuvia