For motorcycle values, see the page on Vintage Motorcycle Prices
Thu Feb 25 2016
wrexhamgeezer at yahoo.co.uk
dalesman puch engine parts required
puch dalesman
hi does anyone have a righthand engine cover and kickstart mec
uk
Tue Sep 11 2012
emilio<at>fastwebnet.it
dalesman puch savage 125
DALESMAN BELFAST?
I've a frame and Puch 125 motora wish rebuilt this bike, if someone can help me with spare parts catalogue, owneer manual, or parts, I will be very grateful
Milano
Thu Feb 04 2010
cyrjordan3 at yahoodot com
1969 Dalesman Moto-Cross Motorcycle Question
Dalesman (unknown)
I know where there is a 1969 Dalesman motorcycle; dirtbike. Don't know anything about them. I can buy it for $450. The motor is apart. Does anyone know anything about them/how rare/what they are worth… etc?
Thanks
Mon Feb 01 2010
jonbarker23 at aoldot com<
ignition parts
dalesman 125
Some recent pics attached. Dalesman in action.Engine sometimes cuts out after about an hours use. No spark. Then will start again when cold. Anyone got any ideas?
Belfast
Wed Jan 21 2009
ramjet54321 at aoldot com<
Dalesman Belfast
How much is a complete Dalesman 125 Puch motor (?) worth on today's market? Thank you for your time.
CA
For motorcycle values, see the page on Vintage Motorcycle Prices
Wed Oct 29 2008
lindstrom-mx at teliadot com<
I´ts ready!
Dalesman Scout 125cc Sachs
A couple of weeks ago I was very happy to make my first run on a Dalesman for 34 year´s. talk about nostalgia!
Mats Sjöblom Falun Sweden
Falun Sweden
Sun Jul 27 2008
nemo-denovo at yahoodot com<
Rare Parts
Dalesman/Sachs 125
There is a local guy here in Jeffersonville, New York
who has been stockpiling parts for all kinds of offbeat bikes for as long as I can remember. Dalesman, Cooper, Tyran, Gemini, Benelli, Moto Morini, Cushman, Guzzi, Jawa, etc. etc.... His name is Francis Huggins and his phone is (845)
482-5086. He also sells new and used parts for just about any snowmobile ever made, but be prepared to pay top dollar for all old parts, he knows he has you by the short hairs ;)
USA
Mon Mar 10 2008
Iianpr at aoldot com
Dalesman moto cross (125 puch engine)
I was intrested to read about the Dalesman puch
125 motocross bikes.I rode one of these bikes in 1972 in schoolboy scrambling events.I took the bike to 4th place in the british championship in that year.I had a small amount of help from the dalesman factory which was only 30 mins drive
away in otley.
north yorkshire
Wed Jan 30 2008
jonbarker23 at aoldot com<
dalesman 125
I have had this bike as long as I remember, i got it minus steering head bearings (complete) a side stsnd and a chain tentioner. The only part I need is the bearings. any help would be appreciated, especially the bearing No. so I can get a
nw one.
Thanx Jon.
Belfast
Are the bearings tapered roller or cup & cone. If the former, it should not be hard to work out which bearings you need. What year is it? Ed.
Sat Jan 19 2008
mail at davidwalleydot com<
Help! I need to buy one!!!!!!!
Dalesman Sachs trials 125cc
I am looking for a 1970's Dalesman Sachs trials to buy. I will ship from anywhere in the world! Please help?
London
Mon Nov 26 2007
aaablech at yahoodot com
puch
dalesman 125cc
need motor parts, rear wheel parts
general info
Lawrence ks usa
Fri Sep 21 2007
kingrickman at aoldot com<
Dalesman
I don't have a query about Dalesmans but I have a Dalesman trials , enduro , mx and a bunch of spares that I am getting ready to sell . Any interest ?
Ma. USA
Fri Sep 07 2007
aaablech at yahoodot com<
dalesman
123cc puch
need info and parts
lawrence ks, usa
Sun Aug 19 2007
geurnblanston at gmavt.net
Dalesman/Puch 125
Dalesman Puch
I'm wondering where I might find more info on my Dalesman motocrosser 125. I've never seen another like it. It has a one piece tank and seat and a Puch engine. Thank you
USA
Mon Apr 23 2007
gashat at dreamscapedot com<
1973 Dalesman
Enduro
Hello Does anyone have a shop manual and parts list for this bike? Would like to get a photocopy to use in restoring a 73 i just purchased. Also looking for front fender and headlight Thanks Gene Shatrowsky
N Y USA
Sat Jan 06 2007
aichholzer at mountain.de
Dalesman Tank
with Puch 125 engine
Hi, I have two dalesman at home and would like to refurbish it! I`m looking for a Dalesman tank and dalesman parts. Where can i buy it?
Best Regards
Robert
Rosenheim, Germany
Tue Dec 26 2006
boo123 at yahoo.com [bounced]
dalesman
i have had mine since i was 13 in 1977. i bought it as a none runner for 40pounds it has a puch 125cc 4 speed engine i have fitted 1973 yamaha dt125 front forks and aloy mud guards. its been very reliable the large barrel and head fins
always keep the engine cool when off roading. sometimes i dont start it for a year and it always starts second or third kick. cheers grant
cornwall
Mon Dec 11 2006
lindstrom-mx at teliadot com<
Dalesman
Dalesman scout 125cc
Hello there! I am rebuilding my old Dalesman scout with sachs 125cc engine.
Right now 10/12 2006 there is lot´s of information about the Wassell and Dalesman motorcycles at the Penton owners group forum/penton talk/Penton Wassell as I made questions about the Dalesman motorcycle. I
have only one picture from back then 1974, me practicing MX on my Dalesman.
Falun Sweden
Thu Jul 13 2006
fox.john at talk21dot com
DALESMAN
125 puch
Hi I own a very nice dalesman with the 125 puch engine, I also have a rolling frame that been cut up for a villiers engine,but also have a good (bare) also have engine bits & casings etc, I also have a early Wassell 175 bantam engine
which is very similar ( frames built by Peter Edmondson of Otley UK (Ilive near Otley) dont see very many of these now, the wassellis even rarer in bantam form!! JOHN.
Settle, N.Yorks
Thu Jul 06 2006
iompotty at hotmaildot com<
Dalesman Motorcycle
Puch 125
Hi,
A friend of mine has a dalesman motorcyce which is a 1970 ish? which is in original condition. He is now looking to sell this bike but doesn't know where to sell and how much it's worth.Can you give some sort of idea how much it's
worth and where to advertise.
Thanking You
Carl
Yorkshire
Try the page on Motorcycle Valuations
Wed Feb 08 2006
aaablech at yahoodot com<
puch/dalesman 123 cc
need piston etc
Lawrence,Ks. usa
Date: Tue, 05 Apr 2005
subject: dalesman motor
Email: patrickhonda.tl at wanadoo.fr
message: hi, , I would want bay a dalesman trial in engleterre, are it that it (he) have there it has sale regards patrick
Tue, 05 Apr 2005
Dalesman Scout 1972 on Ebay
Vendor's Description:
This is a Dalesman scout 1972. I dont know a lot about this make so I'll try to give you as much info as I can. Dalesman was made in England between 1969-1974. The tag on this motor reads: Fichtel + Sachs AG Schweinfurt, motor# 6819568
cc 122 Type Sachs 1251/EA Date of Manufacture 4/24/72 VIN:0141E. It has a one piece fiberglass tank and seat in nice shape. also an aluminum air box. The metal parts are rusty but the bike is all there except the kick arm. A
great subject for resto. The fork looks to be in great shape, the gear box shifts, it has a BING carb...
Date: Mon, 14 Mar 2005
subject: Dalesman Motorcycles
Email: rwrusk at telus.net
message: Hello I have a dalesman trials bike that is slightly newer than the one you have pictured in your site and I'd love to share a picture with you if you are at all intersted. I have loved this bike since I was 3 years old and used to
ride with my father on it. I have always kept my eyes and ears open looking for any others. I live in Canada and we have owned it since new and I have yet to come accross others owning Dalesman bikes although about 5 years ago I did run into
an English chap who told me he used to ride for Dalesman and that his buddy was the one who made all the handbuilt tanks for their trials bikes of that year. I do know it was purchased new in the early 70's by my father and is almost all
stock with the exception of aluminum fenders. Let me know if you are interested in any pictures I may have of mine and look foreward to any more info I can find about mine. Thanks again. Ryan
Date: Mon, 28 Mar 2005
Hello I have taken a few pictures that you can feel free to add to your collection of other bikes and Dalesman Photos. Sadly I didn't have the skid plate mounted for these pictures but I do have it and plan on cleaning the bike further and will send better pictures when I do so.
Thanks again for the great site and I also have the origional manuals etc. and if someone needs any of the info in them (on the Dalesman or Sachs engine) please contact me and I'd be happy to help out if possible.
I know the stock speedo seems slightly out of sorts on a Trials bike but from what we understand it was us for the use in a KR trials. If anyone knows any more about this bike I'd love to hear about it. We have owned it since new but due to the fact that they are rare ....and even more so where we live ....any info would be greatly appreciated.
Thanks again for the great site and all the bikes and info in it.
If you have a query or information about Dalesman motorcycles please contact us