Wed Dec 22 2010
itsdan<at>live dot com
Puch Magnum X
Puch magnum x
Hi there, looking for ANY parts for these bikes, im based in coventry/england and you can contact me by my hotmail, Im also interested in maxi's Buying any maxi bikes or magnum bikes / maxi/magnum engines/frames/ etc. Anything magnum most
things maxi thanks alot
coventry
Fri Dec 03 2010
pmays44<at>gmail dot com
Puch Cheater
I am restoring a Puch DS 60 and need a speedo complete or in parts
St Albans, England
Wed Dec 01 2010
smk5<at>bigpond dot com
bike for sale
puch 250cc
i have a puch for sale, it is a 1956 model,and it is on ebay at the moment.
qld
Mon Nov 29 2010
mr.fog<at>libero.it
Inquiry
Puch M 125 Classic
Dear Sirs/Mesdames,
My name is Francesco Forgetta, I live in Italy and am the owner of an old motorcycle Puch M 125 Classic, frame n. 3610388, produced in 1970 and registered in 1972 (please, find attached 2 photos).
I would like to have as much information on this motorcyle as you can. In fact, I could not find any information on it even in the internet.
I would like to know:
· What year did the production of this model end?
· I have been told that it is one of the first motorcycles of this model produced. Is this correct?
· Can you give me information on its value?
I would be very grateful to you if you could give me this information, even partially, or give me the reference of someone who can help me.
Thanking you in advance and waiting for your kind answer, I am
Yours faithfully
Francesco Forgetta.
Rome
Puch motorcycles friends, just bought a Puch Motorcycle 250 cc 1951, which I am remodeling but I have a part that is not where he is, could you help me? send photos.Regards.
Saludos cordiales,
Jose Caballero Lucar
0051-01-465-6595
Lima - Peru
Tue Nov 23 2010
n.vanwensen<at>hotmail dot com
Tire
Puch MS50V
Dear Sir/Madam,
I have a puch ms50v of which the original outer tire has ruptured (after 37 years!), however I can't find out anywhere what the proper diameter for the tire is. On the side of the tire it says 2,1/4 x 19. Is this the diameter?
Winchester
Mon Oct 25 2010
johndeck80<at>fsmail.net
puch frame numbers
PUCH ?? unknown MOTORCROSS
i have just been given what i belive is a puch motorcross motor cycle ? i intend to restore it,
the fraame number is *27*10422* it looks to be of approx 100 cc
can you shed any light on what model it might be approx year of manufacture etc
regards John
wales uk
Sat Oct 02 2010
oleary.hannah5<at>gmail.com
PUCH DS50K
Im looking for a engine and exhaust,barrel and piston and a head. Or a complete engine if possible. Greatly appreciate any help.
Carlow,Ireland.
Mon Sep 13 2010
jkenberry<at>gmail.com
sunburst head 175 MX motor
Puch 175 MX ?1976
Could use the motor & sunburst head for 175 MX mentioned in the search engine description for this site. Need his email if it was in the forum.
United States
Tue Aug 24 2010
haywood.nigel<at>orange.fr
Puch moped
MS 50cc 1968
Hello, I wonder if you can help me please? I have abeautifully restored 1968 Puch MS 50cc moped but I have recently seized the engine and the I need a new barrell and piston and cannot find one anywhere?!
Are you able to help me or supply these parts please?
Thank you
Nigel Haywood
Lot et Garonne France
Mon Aug 23 2010
kme30<at>hotmail.co.uk
puch Maxi Free spirit
I have a US model Free Spirit, did they ever reach America for sale to the public. My model is dated 1978 and i'm struggling to obtain spares, please help.
UK Suffolk
Wed Jun 16 2010
kaseytoo<at>gmail dot com
Question on Puch 250cc
Puch 250sgs(s)
Anyone know of a 2 carbie model also fitted with dynastart?
Brisbane
Thu Jun 10 2010
hroets<at>osborn.co.za
motorcycle
puch ms50v
I am looking for parts for this motorcycly. Year model 1940
south africa
Tue Jun 01 2010
cefisk<at>gmail dot com
What year is this 175sv Puch?
Puch 175sv
I'm trying to figure out what year this was built. I know it is either late 50's or early 60's.
Atlanta, GA
Thu May 27 2010
sanchesfabiola<at>hotmail dot com
representante de vendas de peças
puch turbo sport
Boa tarde!
tenho uma mobilete puch, modelo turbo sport e necessito comprar algumas peças p efetuar conserto, gostaria de saber onde encontro aki no Brasil, moro em Minas Gerais, mas tenho facilidade para ir em Ribeirão Preto
ou região próxima.
Brasil
Sat May 22 2010
sghdton<at>talktalk.net
sequential carb twist grip
Puch 175 SVS
I have been running a 175SVS since 2008 and wonder if nanyone knows of a better way to control the carbs sequentially?
NE England
Fri May 21 2010
richard.weiss<at>oml.at
Puch 250 MC or 250 SGSS
Puch sport models 250 MC or 250 SGSS
Hi, searching for Puch sport models MC or SGSS, please contact me searching bikes and also parts for it.
Austria
Mon May 17 2010
jhadha<at>rcn dot com
brake light
Puch Maxi Maxi 1 (2hp)
the brake light is on all the time, the brake light switches are OK, Is there a common problem of a short or a grounded wire. the wiring diagram I have makes no sense how the brake light works. I have a 1.5hp and all the readings are the
same but the brake light works fine on the 1.5hp. Need Help
Sun May 02 2010
pozziluisalberto<at>hotmail dot com
manual puch 150 mod 59
restaurar puch sra 150
agradeceria si me dan una mano para restaurar mi puch 150 sra .no tengo informacion , manuales ,despiese,instalacion electrica , desde ya muchas gracias alberto
argentina
Sun May 02 2010
walkndog<at>yahoo dot com
value of motorcycle
puch 1966 twingle
i have purchased a 1966 puch twingle still needs alot of work but runs. could you give me a round about value
southern california usa
Fri Apr 23 2010
charlesharris<at>eject.co.za
puch wanted
puch 250 split single isdt +-1959
wanted for restoration
south africa
Sun Apr 18 2010
aaron.sutcliffe3<at>googlemail dot com
parts
puch magnum x
hello can any help me with finding parts for a puch magnum x mini dirt bike
fleetwood england
Sat Mar 27 2010
cristiansani<at>yahoo.com.ar
Fotos Puch Sra 150
Puch SRA 150 model 1959
Estrimado amigo:Le mando fotos de mi Puch SRA 150 del año 1959, Saludos Cristian Sani
Buenos Aires
Wed Mar 17 2010
cwodb<at>suddenlink.net
Restoring a 1935 Puch 500
Puch 500
Looking for parts and manuals for my 1935 puch 500
California
Thu Feb 18 2010
ari.alamyllari at mona-joona.fi
tunturi
puch 1966 3 hand valve
onko mahdollista ostaa itävallast ko moottoria.
Is it possible to buy the motor from Austria, if yes can you provide the contact information.
suomi
Sun Feb 07 2010
puchms50 at yahoo dot com
puch moped ms50
hi guys:
im from cuba .
im rebuilding this puch.i found it in a basket case.
i found almost every part i need in ebay and from difernet poeple in austria.
Mon Dec 28 2009
tsam.manolakas at yahoo dot com
Puch SGA 250cc 1957 for sale
I have a Puch SGA 250cc 1957 for sale. Anyone who is interested can contact me by e-mail.
Greece
Mon Dec 14 2009
eggers at hotmail.co.uk
Puch M50
Puch M50 GP JPS
Hello, My father has just aquired a Puch M50 GP in JPS colours. It is 1976/76 P reg with 1400 miles on the clock. He is looking to insure it on the house but has no idea what it costs. Can anyone help. Many Thanks Mark
York
Wed Dec 09 2009
colorsbowl at bluewin.ch
dessin ou eclate du moteur
puch maxi haynes manuel
je recherche les plans de montage du moteur pour pouvoir commander les pieces
COEUVE CH
Wed Nov 25 2009
braveheart1967 at hotmail.co.uk
a need a coil & kill switch
puch magnum x 50cc dirtbike
a need a coil & a killswitch or ignition barrel with key and how to order these items got this website from ma local motorcycle dealer in kirkcaldy alan duffus tel 01592 564369
scotland
Sat Oct 10 2009
madnorton at googlemail dot com
PUCH 175 SVS UK owners
Puch 175 SVS
I have just aqcuired one of theese finely built lightweights and just wondering how many are known to exist in the UK. They were only available in black with chrome silencers. Feel free to get in touch.
UK Hampshire
Sun Aug 09 2009
seppo.samppala at elisanet.fi
Puch 50 cc 1962
SeppoSamuel Bing 12 mm carburator
Hello
I'm looking for spare parts to my moped which is made in 1962 and engine is puch 50 cc and carburator is bing 1/12/122. I need spare parts to carburator. Can you help me?
Yours
Seppo Samppala
Kangasala
Kangasala, Finland
Wed Aug 05 2009
tas043 at hotmail dot com
muffler insides
Puch 250 sgs 1956
I am lookig for a muffler insides(original)and a right side battery cover
Wagga Australia
Mon Jun 15 2009
bertosan at libero.it
ricerca pezzi
restauro punch 175 sv anno 1957
cerco moto puch 175 sv anno 1957 funzionante ma non restaurata.
pesaro
Tue May 19 2009
robertgerrits at online.nl
Publicité
Puch M125 1971
Bijdrage voor Gallery
Posted in the Puch 1970s Gallery
Wed May 06 2009
motodangt at charter.net
wiring diagram
Puch vin no. 3702323
I'm not sure the year or model. It's trail bike looks to be a 125cc or 175cc Has a red gas tank. I need a wirring diagram a mouse ate the wiring under the seat.
Saginaw Mi 48609
Fri Apr 17 2009
vovc1964 at yandex.putin
Carburattor
PUCH 800
Greetings! I have carburettor Solex 26 FIP. Whether it was put on Puch 800 or not? Thanks. Yours faithfully, Oleg.
Moldova
Sat Apr 11 2009
harleyinmt at 3rivers.net
need sealed beam headlight
sears puch 250 twingle
am looking for a sealed beam headlight for this 250 cc twingle...HELP
montana, usa
Fri Apr 03 2009
puchkoehler at gmx.de
New Puch Moped Parts
Puch Maxi, Monza, Cobra Maxi, Monza, Cobra MV, MS
I have 80000 New Puch Moped spare parts for sale
http://www.Puch-Zweirad.de
Karlsruhe
Wed Mar 18 2009
bannerkids at hotmail dot com
how can I find the vin number
puch maxi 1975
I traded my 10 speed for this Puch and got pulled over. I am now required to license this moped but need to locate the vin can you help me?
Renee Luras 801 2319121
salt lake city, Ut America
Sat Mar 07 2009
jackie-rumler at yahoo dot com
have 1962moped-steyr-damler-puch-a.g.-graz
body# 6486704 810.94018Ill
I am looking for a manual, wirering diagram,headlights, acually a couple of other things, I would appriciate any help or info from any of you good people out there. I also build hot rods and restore older cars. So if anyone need some
info in that area I would be glad to help. I can locate parts for those things from all over the world. Just having trouble trying to restore this scooter. Its in good shape now and runs after being down 10 yrs. Thanks ahead 4 any help.
richard stickler
dayton In.
USA
Thu Mar 05 2009
boating65 at yahoo dot com
could u tell me alittle about this bike
steyr.daimler.puch 810.89572
I have this bike not sure of the yr or size could u help me at all
I have this bike which a teanet lefted behind for payment. could u tell me more about it and about how much it is worth.
What you have is a Puch Twingle from the 1960s with wheels and forks from a 1980s Japanese bike (probably Yamaha) grafted onto it. Ed.
Sun Jan 18 2009
adriennellevy at yahoo dot com
1966 Daimler Puch
Puch and Allstate 250 SGS
I thinking about restoring 1966 Daimler Puch for my son. I am not a mechanic but watched my brothers growing up so I am smart enough to figure it out. Anyhow, I have a 1966 Puch (to rebuild) and 1966 Allstate (for parts), started to be put
together. I have two of everything but I am sure i will need some parts..how hard is it to get parts and how well does this model run? How fast does this bike go? Is selling better?
California, USA
Mon Jan 05 2009
stan024 at znajomi.pl
szukam nowych silnikow
puch do 50cc
prosze o wiadomosc gdze moge kupic nowe cilniki rowerowe marki puch 50cc
polska
Sun Dec 21 2008
jenzo110 at gmail dot com
Puch 250 1956 for sale
puch sg 250
I have a partial basket case 1956 puch maybe the odd bit missing but 99% present, need to sell in NSW australia , you pick up. please contact.
cooma australia
Wed Nov 26 2008
Rayk295 at gmail dot com
Identifying a Puch Motorcycle
Puch 175
My dad has a Puch 175 1967 and he wants to sell it. I am making up a ebay ad for it and want to find out about it to make a good ad. I have tried to find it on line and the closest thing is the M125 of 1970. Enclosed are a few pics can you
tell me the model number and if its a very rare bike. Thank you Ray Krottner If you need more pics let me know.
Vasalia, CA
Tue Nov 18 2008
ilikemotos at live dot com
Wanted Puch 250
Hey fellow Puch fans...
I'm looking to purchase a late sixties Puch 250 in any condition, as long as the price is reasonable.
Email me if you have something to offer. Thanks.
California
Mon Nov 03 2008
jaygaard at hotmail dot com
puch year identification
puch magnum x
hello.i am trying to find out the year and engine size on a magnum x i just purchased.the engine and serial numbers match.they are 4401580.the engine also has E50 ON IT.ITS A NICE LITTLE PROJECT AND I HOPE YOU CAN HELP ME OUT SO I KNOW WHAT
YEAR AND SIZE IT IS WHEN LOOKING FOR PARTS. THANK YOU VERY MUCH. JAY GAARD
iowa u.s.a.
Sun Nov 02 2008
poo.bair at nemontel.net
Puch Identification
Puch ?
Hello:
Trying to find out what model and year my Puch is. Frame and Engine #3802431, looks like a early 1970's 175cc enduro? Also looking to buy a seat or seat base, and a kick-start lever for it. Thanks, Phil.
USA, Wyoming.
Sun Nov 02 2008
lauriewatts61 at yahoo.co.uk
carberettor troubles
maxi puch
can any one help me!!! i need a puch maxi slide carb 1978
cornwall
Thu Oct 16 2008
smith811215 at bellsouth.net
Parts
Puch (Pero) 2001 Scooter
The mechanic who is working on my son's scooter thinks the problem is in the CDI box or a stater, do you know where I can find a serice manual that would show him what specs to look for?
Tennessee
Wed Oct 08 2008
Jared-2-27 at hotmail dot com
parts/motors
puch moped newport
do you have any parts for a 1978 puch newport moped? or a new 50cc motor to go in it? I am looking for cheap parts and or a motor.
Nebraska, USA
Fri Sep 26 2008
Charles.eagleacpros at hotmail dot com
Finding parts/ information
1978 PUCH MOPD
need to know how to clean rust from fuel tank,and needs oil fill plug, looking for wire dig, and other ways to restore it.
FL 32134
Thu Sep 25 2008
ddesaintaromain at bigpond.com.au
air cleaner for puch 1956 SGS 250cc
puch 1956 puch SGS 250cc
Help! I need an air cleaner for this model motorbike. Can you help, how much would it cost? From Danny
melbourne, Australia
Sun Sep 14 2008
go.2 at btinternet dot com
VIN Plate
Puch Maxi
I have a 1979 puch maxi with V5 Registration Document, but the VIN plate is missing. What can I do?
Worcestershire
Mon Sep 08 2008
abbraccio6 at sbcglobal.net
transmissio oil
puch 1977 max
what kind of oil do i use
Sun Sep 07 2008
pancho.van.kasteren at telenet.be
puch M125cc.
1970 M125
Good afternoon,
I have a question, and I hope you can help me.
I will try to explain this in the best posssible way.
I have a Puch M125CC, and I miss one piece that I can't find.
The piece I miss is a speedometer gear, driving (25 teeth) for the front wheel.
If you have this particular piece, is it perhaps possible for you to sent it to Belgium?
I will pay all charges, if it's payable ofcourse.
To help you I can give you the reference for this piece.
Ref. no.: 40
Spare parts nr.: 366.1.40.060.1
Description: speedometer gear, driving (25 teeth).
Hope this info will help you.
Kind regards.
Pancho
België
Mon Aug 18 2008
kaweahtim at aol dot com
puch 250 twingle bob tail
I have a puch 250 with a bobtail on it Its white and looks like it has been raced before it had the name stan writen on the seat. Zeug nr 717728 the body and engine # is 1717728. What year is it and why the bobtail
Visalia,CA. usa
Mon Aug 04 2008
tattoojimmy52 at aol dot com
point setting
puch maxi-II
need point gap
usa
Thu Jul 24 2008
bficek at ficekelectric dot com
motorcycle/moped steyr damier puch
sold by sears roebuck ser #a1094381
need parts manual and where in can purchase the parts thank you BILL FICEK LA SALLE IL. USA
LA SALLE IL . USA
Sat Jun 21 2008
roydona at aol.co.uk
ANY OTHER OWNERS ??
Puch 250 SGS 250 SGS
Are there any other owners of this model out there to swap info?
PLEASE CONTACT RON
ESSEX ENGLAND
Mon Jun 02 2008
biigs at netzero.net
Puch 1976 Hardtail
Looking to get my Puch going again but need an electrical diagram to re-wire bike. Also if there is an engine breakdown manual that would be great cause I have to take the whole thing apart and clean it all
Ft. Lauderdale, FL USA
Sat Apr 12 2008
rm.sanders3 at gmail dot com
help to all
puch 175 sv
hi all that need help a kind gent from australia told me about a web site puch-wieser.at (404) i was looking for a regulator for my puch 1956sv 175 these guys got me sorted out my german is not very good but i came right got what i need
sent right to my door thay are really good try them out thay will sort you out. keep the old wheels turning you all.
regards ryan.
rm.sanders3 at gmail.com
USA
Fri Apr 04 2008
derrick.mountford at btinternet dot com
puch parts
puch cheetah
could you please supply a 60cc cylider and cylinder head. also piston, two sets of piston rings and threee gaskets please. if so would you send me the amount. thanks derrick
Stoke-on-Trent, England
Thu Apr 03 2008
gnordstrom at shaw.ca
Puch 175 MX crank seals, gasket set, bearings
1972 Puch 175 MX motocross
I need crank seals, gasket set and bearings to rebuild my engine. Can you help?
Victoria, Canada
Tue Mar 04 2008
KEVIN.PINTO at ZA.ABB.COM
Puch sg175 sale
puch sg175 sgm175 twingle
interested in selling
south africa
........
SHE "PUCH" HAS BEEN SOLD THERE IS A
URAL 1997 650CC R18000.00
ROYAL ENFIELD 500CC BULLET R22000.00
Wed Feb 20 2008
lpacker564 at aol dot com
front disc brake parts
puch grand prix
looking for caliper and brake lever seal set plus pads. alternatively the whole works i.e. caliper, disc pads, line , complete handlebar assembly.
uk
Mon Feb 18 2008
Spin1now at yahoo dot com
Moped
Puch 1980 Magnum MKII Limited Edition #071
Hi All,
I am the original owner of this beauty. Can anyone tell me what it is worth? I put a 65cc kit on this moped and blew past a cop doing 68MPH when I was 15. I love it and its in great condition. Now Im 35 and I really dont have the room for
it. I am thinking of parting with it. But, I would like to get an honest esimate of worth. The original shop where I purchased this moped is making an offer. I look forward to your responses.
Cherry Hill, NJ, USA
Fri Feb 01 2008
juls.ward at gmail dot com
How to Get an Estimate
Steyr Daimler-Puch AG-GRAZ 81089571
I have a 1967 Steyr Daimler-Puch AG-GRAZ with #81089571 which was my dad's. I am looking for information on how to get an honest estimate of its value. It has sat in a clean garage (upright) for over 25 years. It started right up about 10
years ago but has not been started since. It has never been recked and is in good to excellent condition. (aside from sitting for so long). If you know who I can contact to get a value estimate please contact me at juls.ward at
gmail.com
Ohio
Sat Jan 26 2008
michael.midgley3 at btinternet.com
id
puch ms50d
could any one confrim the age of my puch with only the frame number
regards mick
yorkshire
Fri Jan 25 2008
andrzej.starzynski at polcommerce.hu
identification production date
Puch moped DS 50
I have bought in Hungary this lovely model with nr 7628851 on the engine and same on the body. can you help to identify production year.
Hungary/Poland
Sun Jan 13 2008
Mc101-forlife at hotmail dot com
Puch magnum x 50cc forks
Magnum x Puch
i was woundering if their is any person who hold's a spare pair of puch magnum x 50cc forks that they are willing to sell for around £10 - £20 please contact me on 01515137189 Steve Greenhalgh
Neston, cheshire
Fri Dec 28 2007
ptkgresford at yahoo dot com
Puch 125m
H- i Is there anyone out there who would like to own a 1969 Puch 125m motorcycle?
I have owned it since 1975 but now I'd like to pass it on to someone younger!
I live in UK near to Chester
All offers will be considered!! - especially high ones!!
RVSP - PK
e-mail for details
Chester, UK
Sat Dec 22 2007
mydogrou at mts.net
Service Manual
Puch Sport MK 11 1980's
I am lloking for a service manual for this bike can you help.
Canada
Try the page of resources for Books and Manuals
Fri Nov 30 2007
bobmcgrath21 at hotmail dot com
Puch
All
Hi, I see there are a lot of requests for help with spares, etc on the Puch page. I think Puchs would have the best spare parts availability of any make. Owners should look up puch-wieser.at (404) and
www.rbo.at I'd be amazed if they couldn't get all the items they are asking for. Cheers, Bob
Australia
Sat Nov 24 2007
corylg at chartermi.net
clutch shoes and other parts
Puch Magnum X
Hi Cory here to ask for help locating a parts place. Number frame and engine 4401189. Tag Austria Steyr Diamler Puch Ag. Seat says Magnum X. Engine says E50 and clutch seems to have 2 shoes. Bike runs beautiful but clutch doesn't seem to
engage. I hav not pulled it yet but will tomorrow. Seems to have good spring pressure. I am looking for a place that may sell parts for this bike, triple tree bearings, forks maybe and clutch parts. I think its a 1979, single speed and so
far seems to have all American bolts.
Orleans , Michigan
Sat Nov 10 2007
dizquierdo at speedy.com.ar
Owner and/or workshop manuals
Puch SRA 150
Hello. My name is David Izquierdo, from Argentina. I´m restoring a Puch 150 moped, VIN 3301590 (Not sure what year it is, but it has only 6150 kms from new!) It would be of great help to have some kind of manual. And if someone can
tell me from the VIN number what year it is, I would be very thankful. Best regards! Great site.
Buenos Aires, Argentina
Wed Oct 17 2007
fc.corr at ntlworld dot com
registation
puch ms50v
I have no number plate or v5 with this moped, but have matching engine & frame numbers.6083277. How do I retreive the original number.thanks, Fred.
manchester
Fri Oct 12 2007
rick at gyxo dot com
seeking engine parts
1965 puch campus 50cc
I'm in need of a cyl. for my '65 campus scooter... Any help would be appreciated.
Holland, mi. U.S.A.
Tue Oct 09 2007
wbsimmons at bresnan.net
NEED INFO PLEASE
AUSTIA PUCH MODEL #810.89571
I don't know what year or cc of this bike can anyone please tell me & let me know where to find parts & manual
montana
Try the page of resources for Books and Manuals
Fri Oct 05 2007
ramiahn at stefanutti.co.za
Manufacture certificate
PUCH MK11 1978
Awhoi are the agents in south africa
SOUTH AFRICA
Fri Sep 28 2007
BB6YORKS at aol dot com
m125cc
Hi
I've just bought a 1968 Puch from ebay with a lot of history, this was the bike that in 1968, the magazine Motorcycle Mechanic undertook a 2000 mile Puch test on,- a marathon run from Big Ben in London to the clock tower in Graz and
back. I am trying to find out some more information about this and wondered if anyone can help. Thanks Debbie
Yorkshire
Mon Sep 24 2007
karenanndpwk at xtra.com.nz
puch motor bike parts
250 sgs PUCH
I would like to bt parts for my Puch motor bike I am restoring In New zealand HOW Do I BY PARTS
Sun Sep 30 2007
epages at terra.es
Puch 175 MC USA
Hello!I have Puch Mc 175 USA restored, except the mudguards. This bike hasn't got the original mudguards.
Do you know where I can buy the original aluminium mudguards and the supports. I send a photo of my bike.
Thank-you
Spain
Thu Sep 20 2007
paul-cindy at xtra.co.nz
Ring set
Puch 250 SG 1964
please help I need rings & gaskets for head & barrel on my 250 SG 1964 where can I buy these from thanks Paul NZ
NEW ZEALAND
Sun Sep 16 2007
DomiRacer at Fuse.net
125&172puch trials motercycle
125&175puch trials manual
to get a 70or so page of info from factory manual call (513)8711678 IN USA 19 bucks us plus ship at domiRacer cinn.ohio
ohio,45230-0439usa
Fri Aug 24 2007
playpd1 at comcast.net
puch moped
puch serial # 5311555
pls what can you tell me about this1978 -- 1982 puch; thank you paul
boston
Thu Aug 09 2007
gailgoan21 at hotmail.co.uk
parts for puch
RLA 125
Do you know where I could get parts for my 1959 puch scooter/moped? I need a trim bar (right and left) and mud sheild bar (right and left).
northern ireland
Mon Aug 06 2007
allertz at tpg.com.au
spares need
Puch 250 1964
Do you know where I can buy parts for the above bike; I need at least new crank seals; probably bearings etc.
Sydney, Australia
Thu Aug 02 2007
gypysysol at excite.com [bounced]
Looking to sell 2 used
1977 PUCH and Maxi
Trying to contact someone stateside interested in two bikes. Low miles on running one and one for parts. Know it is an unusual request, appreciate your help. Cool bikes, sorry to sell!
Wed Aug 01 2007
warriorns at yahoo dot com
Bane
e-50 pony express
I have problem!
Start the mator but no power when a seat on seat-na aceleration and motor have a little gas! However when i motor put on center stands and give hand-gas rear wheal fly like crazy! Is the problem in clutch?
This motor stand four years ,but when i first move him i dont have this problem!
Serbia ,Novi Sad
Is your bike a Puch Maxi? Yes,my bike is Puch Maxi with 1 speed!
Who ATF oil is the best for this bike?
Regards.
Bane
...
I think ,i solve this problem!! ATF oil is problem too viscosity!
When I drop oil from motor- work properly-whitout oil!
In motor be ATF D II oil! Who oil is properly for this smoll mator!
I have brochure of this tip motor ,but is old name for oil who the best for this model!
I send you the picture from this brochure!
Regards!
Fri Jul 27 2007
x-avierex<T>hotmail dot com
Need manual...
Puch Scooter 1959 125cc
Hello... I´m from Argentina and I have a Puch 125cc but haven´t a picture of it(sorry). I need the manual, if it is possible, send me the manual. Thank you very much! bye...
Argentina
Tue Jul 24 2007
sfarm at ak.net
Looking for service manual
1977 Puch Newport
We got a 1977 Puch Newport from a neighbor who had no information on it at all. We are trying to get it running. Does anyone have a manual or would be willing to make a copy of their manual
If someone can make a copy, please send one here as well so I can post it on the site. Ed.
Sun Jul 22 2007
harley134u at yahoo dot com
Look what i found
1959 Puch?
Look what i found in a old barn that was there for some 20 odd years.
Iowa, U.S.A.
Sun Jul 22 2007
kcabibi at yahoo dot com
fuel delivery system
1969 Puch 250
Does anyone have close-up pictures of how the fuel / oil lines are hooked-up on a '69 square tank? I ordered a manual that I thought was close, but it wasn't close enough. Any help at all would be greatly appreciated!
California
Fri Jun 22 2007
ray at jobarrytextile.co.uk
TRIKE PONY BUBA (503) GTX KAT
PUCH
Saw trike in Switzerland last week and am intersted in buying. But from where and whom? Emails to PUCh bring zero reponse
york, england
Wed Jun 20 2007
f.goan at btinternet dot com
1959 puch tail-light
I am looking for a tail-light for a 1959 puch scooter? wondering can anyone help please!!!!!
belfast
Tue Jun 12 2007
riverlanddairy at pacific.net.au
parts wanted
sg250 - I believe it is a sg250 puch bout 1957-1960
can i get parts in australia
cohuna, Australia
It's unlikely you will find parts for this in Australia. You will need to source them from Germany, I expect. Ed.
Mon Jun 11 2007
paul.johnson at boltonathome.org.uk
engine parts
puch moped 1973 49cc
does anyone know where i can get main engine bearings for a 1973 Puch?
bolton, uk
Mon Jun 11 2007
possum at wcoil dot com
1956 Puch
Puch
Looking for parts for restoration for a 1956.
Posiable to locate a source of parts in United States or?
Lititure also
thanks
USA
Thu Jun 07 2007
gavinosborne at cotswoldwireless.co.uk
EXHAUST SYSTEM
PUCH MS50
Has any body got an exhaust system they wish to sell
OXON.
Mon Jun 04 2007
lez.d at ntlworld dot com
technical data
puch vz50
can you tell me where i can get the technical data on this bike. It needs oil. Do you know the quantity of engine oil required please?
suffolk uk
.......
I am most looking forward to riding it.It is now a runner after being on it's side for several years in the elements. Newpoints and a condenser should refresh it lovley. I think I have far too much oil in it! 875mls!(?)
Regards
Les
Wed May 23 2007
uritartad at hotmail dot com
parts for 71' puch
71'Puch M125
Trying to find parts for my bike. Need gas tank, seat, and engine parts. If anybody has idea or parts please contact me.
Thu May 17 2007
schonbacher at aol dot com
spark plug
puch ds50
Hi i have a 1962 puch ds50 and want to know the correct sparkplug. thanks carl uk
Gloucestershire uk
Mon May 07 2007
katneil at paradise.net.nz
Puch workshop manual
Puch 1966 250 cc Scooter
I have a 250cc Puch scooter and am finally looking at restoring it. Just want to know where I could get a workshop manual?
Try the page of resources for Books and Manuals
Wed Apr 25 2007
rdwhipple at bellsouth.net
Puch scooter
steyr-daimler-puch
I have a 1965 puch r60r with ser#8200062. I Have seen pix of the puch r50r and r50r puch made for the condor scooter co. But cannot find anything on my r60r. One more oddity- it has usa1 stamped on top of the trans cover. Any help
would be great. Thanks.
Richard whipple
kentucky usa
Tue Apr 24 2007
dbutle23 at ford dot com
Puch DS50K?
I am trying to identify this bike. The engine number and chassis number appear to be the same. 7613030. Dan
Dan
South Africa
Tue Apr 17 2007
RANHAAS at NEWULMTEL.NET
Need a key to lock Puch Maxi
Puch Maxi Luxe
Need a key to lock moped front steering and rear wheel lock.
Key number is :P7841
Minnesota USA
Sun Apr 15 2007
garthkellaway at comcast.net
Puch 174 about 64
I have a complete Puch 175 Mx motor and sunburst head free to anyone who collects them
Campbell Californial USA
garth
Sun Apr 15 2007
thyspottas at yebo.co.za
Year Model Puch 175sv
Steyr Daimler Puch A.G. Graz 175 SV
Can't figure out the year on this one - the vin no is 580982. Please help!!!
Thys
South Africa
We have limited information on this page about Motorcycle Serial Numbers.
Sat Apr 07 2007
pezsal at aol dot com
how do i sell
where do i begin
ive recently decided to have a clear out , im hoping to sell my Puch MS50D (73) one owner and stored for 33 years all the paperwork is in mint condition, i also have a 81 yamaha xs 250 and a 78 honda cb 900 c , ten speed split box on a shaft
drive. any help would be treasured
staffs ,England
Sat Apr 07 2007
lalo45 at hotmail.it
PUCH 250 1939
Avrei bisogno dei pistoni da 50 mm. Come posso fare?
Tue Apr 03 2007
olasoueudenovo at hotmail dot com
Motoesa
Mini Puch
Dear Sirs,
I didn't find any photos about this model.
Hope to hear from you. Thanks and Best Regards
Antonio
Thu Mar 29 2007
mor at erudi.no
What year???
Steyr Daimler Puch A.G. Graz 175 SV
Can't figure out the year on this one - the vin no is 569609. Please help!!!
Norway
Wed Mar 28 2007
somwang947 at hotmail dot com
want to buy engine of puch 250 cc
250 sg
want to buy engine of puch 250 cc
thailand
Wed Mar 28 2007
msagirtr at yahoo dot com
for sale
( PUCH 250 SGA) 1959
Hi everybody.my name is mesut saĞir.I am writing in turkey.I have an original 1959 puch sga 250. I love this cycle very much but we have any spare in turkey so I have decided to sell him.if you are interested in this mail please
write to me an e-mail and you have got this classic baby
TURKEY
Sat Mar 10 2007
danville11 at msn dot com
WHAT IS IT
STYER DAIMLER PUCH #81094380
I have had this cycle for many years. What year and what size engine is it. I can get pictures.
KANSAS USA.
The bike is an Allstate Compact 50 - I'll post the images in the Sears section.
Mon Mar 05 2007
bigb at hostflo.com.au [bounced]
wiring diagram
steyr - daimler - puch ag 1/78 vin 9435630
Hello do you now were i can get a wiring diagram as i am tring to fix up one and some has the wiring all wrong the main eara is the ignition system this was i should be able to get it going again. thank you
Australia
Sat Mar 03 2007
godinthemachine at hotmail.co.uk
Pictures please
PUCH ?????
I am trying to get pictures of my first moped. It was an orange 50cc Puch. Dual seat with pedals. MV50 I think. The year I had it was 1978 and it was second hand then.
Any help please.
Bedford, England
......
It looked very similar to this one. I dont remember a seam around the petrol tank and the top of the tank didnt have the large cover just a chrome filler cap. I also dont remember the box on the side of the rear wheel arch.
Many thanks
Andy
Mon Feb 26 2007
cap122 at verizon.net
PUCH
Pre WW11
My grandfather had a shop in Poland before the war I have some pictures and would like to find one of these bikes,with sidecar. Can you help?
Wed Jan 24 2007
pdcharl at bigpond.net.au
What Model is this please
Puch ?
Hi, I took this photo in Vienna recently and am trying to find out year and model for my archive. Can you tell me?
Thanks Paul - Australia
I think it's an MV50 of about 1974. Ed.
Tue Jan 09 2007
zebedee3 at aapt.net.au
Puch M125 de-luxe
I have for sale a 1970 Puch M125 Genuine 9000 miles. Single owner. Last registered in Austraila in about 1996.
Anyone interested?
Hobart, Tasmania
Tue Dec 19 2006
erasmus99 at hotmail dot com
Year of manufact.., manual and parts
Puch 250 S4 - pre or WWII...I guess
Dear Sir,
I found a treasure, the subject bike. It needs restoration but is beautyful. Therefore this is to kindly request your advice on:
The Motor and Chassis N. are OZ74-124632 is it possible to understand the year it has been made?
There a a lot of german sites, where can I find english, french, italian, spanish (readable) sites for parts and manuals?
Thank you so much
best regards
Erasmus
Rome - Italy
Sat Dec 16 2006
carcollectors at power-net.net
puch identification
810.89571
need to know year and cc please help
thanxs Butch michigan usa
michigan
Mon Dec 11 2006
greenc876 at aol dot com
thorttle cable
puch magnum
hi does anybody know where i can buy a thorttle cable from or new thorttle many thanks rich
west sussex
Sat Nov 25 2006
ddavici at hotmail dot com
Ignition points
Puch Maxi 1978
I have a Puch Maxi 2 speed which does not produce spark. I have a new set of points which have just one black wire attached which goes to the condenser. However the set I am replacing has a blue wire as well as a black wire attached at the
same point which are held by a small nut. I don't see a way to reattach the blue wire to the new set of points. How can I get this to work?
Berkeley
Mon Nov 20 2006
olli-matti.lieskivi at kolumbus.fi
puch ds60r
Hi, i need motor covers for my 1965 Puch DS60R scooter.
Finland
Mon Nov 20 2006
puch m50 gp
Email: robert.youngman at homecall.co.uk
message: looking to buy a Puch GP prefrably in J.P.S colours if pos any condition considered
UK
Wed Nov 15 2006
happygoluckyandrew at yahoo dot com
Puch Maxi Lux 1981
Looking to buy a new Shut off Valve...for PUCH MAXI LUX model: YEAR:1981
USA
Sun Nov 12 2006
office at hackerglas.at
we search poster: puch 175sv / puch 250sg / puch m125 / puch vs50l
1200x900mm
thank you
Try http://www.thevintageposter.com
Fri Nov 10 2006
bones101588 at yahoo dot com
need help with a 79 puch for my class
Puch model 5337505
Hi, my name is donny. i'm currently working on a 1979 puch for my engines class and was told to research it due to the fact my techer is unfamiliar with it. i was wondering if someone could help me out. i just need to know that if i would
need replacement parts, were i would be able to find them, if they make them anymore. any help would be greatly appreciated!
Minnesota, USA
Thu Nov 09 2006
ashby315 at sc.rr dot com
manuals
steyr-damiler-puch ag austria
i have a 1978 puch vin# 5325998. what is the size of the motor and does it take gas and oil or just gas. sounds like it wants to turn over but no spark.i live in myrtle beach, s.c. also missing something on handle bars wires not pluged into
something
myrtle beach, s.c.
The engine uses premix. Ed.
Tue Oct 31 2006
rinaldimargarita at hotmail dot com
scooter puch 1959 sra 150
sto cercando informazione per la valutazione di questo modello. atenti saluti.margarita rinaldi
Try the page on Classic Motorcycle Prices
Thu Oct 19 2006
hilda at vargaspiedra dot com
Piezas para la Motorcicleta
Puch 1957 175 cc 4 Cambios
motorcicleta Puch de fabricacion austriaca del año 1957 de 175 centimetros cubicos de 4 cambios, Necesito las orquillas de los cambios de adentro de la moto.
Translation: Pieces for the Puch 175 cc 4 1957 Changes motorcicleta Puch of Austrian manufacture of year 1957 of 175cc 4 speed, I need orquillas the changes of inside of moto.
Tue Oct 17 2006
f.goan at btinternet dot com
puch 125rl scooter
i am looking for a rear tail light for 1957 scooter
fermanagh
Sat Oct 14 2006
rogerkilby at btinternet dot com
puch ms 50d
hi i have a puch ms 50 d 1972 model i need to be able to prove this moped is a 1972 model so i can retain its originan number can you help
Does anybody have a copy of a parts list for this moped
regards roger
luton uk
Sun Oct 08 2006
chester--pinter at hotmail dot com
parts
puch 1978maxi 2speed auto shift
need main drive gear assembly in trani
alberta canada
Thu Oct 05 2006
bpps1990 at tpg.com.au
light & starting switches wanted
Puch 150 SRA (1959)
I am after the light and starter switch for a SRA 150 scooter and also a manual if you are unable do you know who could
Regards
Brian
Perth Australia
Wed Oct 04 2006
brentlehr at gmail dot com
Puch Scooter
Manual 3 speed, model unknown
I just bought a Puch scooter and was told it's a 1964. There are decals on the front fender that say "Pocket Rocket." I'm trying to figure out what model it is. The only numbers I can find are 8200062 stamped on the engine. It's a 3 speed.
Can you point me in the right direction?
KY
........
I think it's very similar to the all state [Sears Allstate] mechanically. Here's a link showing pictures of the same scooter restored.
http://www.benvanhelden.nl/Condorclub/condor/Scooters/R50/CondorPuchR50.html
I got it running today but have issues with the 3 speed. It was a twist shift deal but the PO made a lever system that doesn't work too well. Is there a clutch on the all state models? The lever on the left handle bar doesn't have a cable so I've had to start it in gear on the stand and just take off. Once I get that sorted out she'll be road worthy.
Thanks for your help.
Brent
Sat Sep 23 2006
tim at 64-bit.org
Mr T German
Puch m125 delux
I have a Puch m125 de lux with 7100 miles on the clock thats been sat in a garage for 20 years,and looks brand new. I was wondering how much it would be worth now?
England, Devon
Try the page on Classic Motorcycle Prices
Wed Sep 20 2006
sutton-t at stjohns.edzone.net
looking for....
1975 175cc enduro puch
Hi, I am interested in finding a 1975 175cc enduro to restore...Years ago I owned one and would like to once again.
st.johns, michigan usa
Thu Sep 14 2006
Micke4192 at hotmail dot com
Spare parts and documentation
Hi,
Have been offered to buy a motorcycle of the brand Puch but before I decide to do that I need to know if there is any possibilities to get spare parts. Could you please, support me in this matter?
Parts availability will be very much dependant on the model as they have been producing motorcycles for a good many years. ........
Thanks, for your promt answer. What kind of information do I need to have to be able to know if there are any parts availible? More then year and modell? If I send you a photo on it could you help me to establish the type and year?
Best regards,
Mikael
Sweden
An image will go a long way towards establishing the model, Mikael. The engine and frame numbers will also help, but leave that until after I've seen the image unless you have them readily to hand.
......................
Can you establish the model and the year of it? What price is the moste common on this type and shape of the motorcycle? From my feeling it will cost a lot to get it in shape. Both the cylinder and tha colves are in bad shape. It haves
two colves and one cylinder?? Strange one.
.......
The bike is a Puch, a split single design widely referred to as the Puch Twingle. More information at the Wikipedia...
Sat Sep 09 2006
I'm currently restoring a 1965 Puch DS50 ...
Entry moved to Sears Allstate section
Thu Sep 14 2006
Micke4192 at hotmail dot com
Spare parts and documentation
Hi,
Have been offered to buy a motorcycle of the brand Puch but before I decide to do that I need to know if there is any possibilities to get spare parts.
Could you please, support me in this matter?
Best regards,
Mikael
Sweden
Parts availability will be very much dependant on the model as they have been producing motorcycles for a good many years. Ed.
Thanks, for your promt answer. What kind of information do I need to have to be able to know if there are any parts availible? More then year and modell? If I send you a photo on it could you help me to establish the type and year?
An image will go a long way towards establishing the model, Mikael. The engine and frame numbers will also help, but leave that until after I've seen the image unless you have them readily to hand.
Fri Sep 01 2006
janventer1 at telkom.net [bounced]
Fuel tank shape
puch 250 sg or sgs
I own a puch, but this motorcycle is fitted with a square fuel tank which has two caps, one for fuel and one for oil. It also has the carburettor and air cleaner facing out towards the side of bike. The part number, according to my spares
manual, is 250.1540.2. Can you possibly identify the model?
Many thanks, jannie venter.
South africa
Thu Aug 17 2006
petersporea at aol dot com
Puch Maxi
I have a Puch Maxi, I did alot of repair, but I have few problems...by motor/transmisie on lower side it's a Screw-Cap (what's for ? is for oil or transmission liquid ?), also the gas require some oil or not(what's the ratio ?), because when
I start it, does not stay on long, and restarts very hard and is making some noise by motor (or gear box)...can you email me some instructions...or manual copy...?
Coral Springs, Florida
Sun Aug 06 2006
grimleyj at bellsouth.net
Need service book and parts
1957 or1958 Puch sgs 250
Just got this bike which I road when I was 16 need help to refinish
Mississippi
Thu Jul 27 2006
jay9ninja at aol dot com
puch cheetah
hi do ya know of any sites i can find info on this bike plz
london
Try the Puch section of Bikelinks, and also under vintage
scooters.
The Puch Cheetah is an attractive 50cc (?) scooter with 12" wheels from around the mid 1960s. Ed.
Mon Jul 24 2006
puch-sgs at yahoo dot com
Searching for Puch/Allstate
250 MC, 250 SGS Sport etc.
Hi! I am searching for Puch bikes from the late fifties to early sixties, sport types favored. If you have a bike for sale or any information please contact me. Thx!
Mon Jul 17 2006
vlad-eu-danila at yahoo dot com
puch moped
Dear Sir,
My name is Vlad Danila, and I am the owner of a Puch moped. It is a old model from 1963 (79 KFG 1955). I have all the original documents. It has a 1,6 PS, 48,767 engine and it still works but the moped is not beeing used.
The reason I turned to you for help is because I would like to know approximatley how much this moped is worth.
I hope I hear from you soon.
your's sincerely
Vlad Danila
Sibiu, Romania
Try the page on Classic Motorcycle Prices
Sun Jun 25 2006
joebrooks66 at aol dot com
can you help me?
i have resently purchased an old puch motorcycle (children size) it isnt in much of a good condition but i plan to restore it and get it running!!!
devon (england)
Sat Jun 24 2006
www.bidwell7 at yahoo dot com
need motor for puch maxi
built in 1978
I am looking for a motor for moped built in 1978 from marvin beadle 1629 mansfield st port huron mi 48060 thank you for any help
Sat Jun 24 2006
citovcity at hotmail dot com
Parts
1977 Puch moped
I'm looking for piston ring (front and back) and right hand on and off power switch.
Garden Grove,CA
Fri Jun 16 2006
flyingajstowing at sbcglobal.net
1977 puch newport motorcycle
need rear wheel tire tub
us
Sun Jun 11 2006
bidwell7 at yahoo dot com
puch maxi 1978
looking for parts and a place to get it fixed in the usa near port huron mi 48060 to replace the switch turn it on and off new tail light
Sat Jun 03 2006
laineysherard at hotmail dot com
spare parts
puch 250sgs
hello anybody know of a supplier of parts for this bike thanks tony
Manchester
Thu Jun 01 2006
IRONOXIDEDESIGN at BELLNET.CA
Puch 800cc four cylinder
seeking parts and contact with other owners.
rear wheel internals, front fender, headlight complete.
CANADA
Fri May 26 2006
jgc7 at ptd.net
puch parts
puch 250 twingle
seeking parts, fuel shutoff valve, rear tail lens, left side door
Pennsylvania
Sat May 13 2006
trevorm40 at hotmail dot com
clutch e50
puch magnum
hi,i am looking for a clutch for my magnum e50.can you help .thanks
47 france
Thu Apr 20 2006
johnm at childrensmuseum.org
Maintenence Manual
Puch Maxi-Luxe
I am looking for any kind of repair manual that lists general suggestions for trouble-shooting or repair and maintaining this moped. Thanks!
Indianapolis, IN, U.S.
The Haynes manual would most likely have such a section. It's out of print but copies may be available from specialists or auction. There is an owners manual online at
http://mopedriders.org/
Mon Apr 17 2006
jameshorncastle at yahoo.co.uk
Puch moped 1973
MV50/3
I have been given a racing green MV50/3 Puch moped bought in 1973. It has only done 500 miles but has not been used for 30 years. In good condition. Do you know how much i should sell it for in the UK.If you could advise it would be
appreciated or point me in the right direction.
Thanks
London
Try the page on Classic Motorcycle Prices
Mon Apr 10 2006
vintagerings at yahoo.ca
..I should put a want add for the crank bearings for puch
I have couple engines both need bearings..last time I chkd
couldn,t get them..Lamborgini used same bearing
Garry
Sat Apr 08 2006
marceldebruyn at skynet.be
Puch Maxi S
We have a Puch, but the official papers are lost.Our question: is there a possibility to get a duplicate of them?
Bornem-Belgium
Wed Apr 05 2006
norbstar at gmail dot com
For Sale
Puch SGS 250 ccm
http://www.webgalaxy.hu/puchsgs/
Serbia & Montenegro
Tue Apr 04 2006
regat69 at msn dot com
What is it ?
Styer--Daimler-Puch #810.94180
Trying to find out what year etc. this old bike is. engine case no. 1907-225
Oregon, U.S.A.
Mon Apr 03 2006
barb235 at ptd.net
Puch motor scooter
Could you tell me if there is a dealer in the tri state area of northeastern PA.?
PA. USA
There may be one listed in the Puch section of Bikelinks.
Mon Mar 13 2006
scsu636 at sbcglobal.net
punc moped
what parts do i need to make my puch go faster. It is a newport 2.I saw on the web one guy got his up to 50 mph. thank you
Tue Mar 07 2006
ayam-jabrik at yahoo dot com
about my puch?
pardon me..i'm faiz from indonesia,i have puch sgs 250 1958,and have trouble in my swing arm..can you tell me where i can get bearing for my swing arm?? please..
thank you
indonesia
Tue Mar 07 2006
fatfishrik at yahoo dot com
58? Puch 250
Hi, I have a late 50s/early 60s Puch 250 that I want to restore. It is in relatively good shape but where can I find new/used parts? eg. seats, a headlight, some trim? Thanks!
USA
Wed Mar 01 2006
Criram7 at yahoo dot com
Puch Mopeds And Others
I am a Mobile Mechanic In Napa Ca. And am restoring + chopping a Puch For a Client. I can get parts for many mopeds of many years and can repair any thing. If ya have somthing please contact me. I can travel with in reason. Contact me Via
E-mail with questions or comments. Thanks for you time!
Napa, Ca, USA
Tue Feb 28 2006
hillahay6 at hotmail dot com
puch modle 810 94 380
what year, are there parts, who would sell parts.
oklahoma
Mon Feb 06 2006
edruet at noos.fr
PUCH motorcycles
Hi ! here are some links that could be usefull !
www.rbo.at/.
http://amicale.puch.free.fr
Wed Feb 01 2006
lavagotical at yahoo dot com
1959 Puch Scooter
I need to know where to find parts for this 1959 Puch Scooter. I only speak english so it is difficult. I need points, condenser and the transmission cover that the kick goes to. Thanks for you time.
Toronto, Canada
Thu Jan 19 2006
bhuyett at kc.rr dot com
puch twingle motor parts
I am looking for pistons and rings for a 175. Preferrably 2nd overs.
Do you know who I could buy them from?
Thu Jan 12 2006
savioroiz at rediffmail dot com
Puch 175
Please looking up for ELECTRICAL DIAGRAM for 175cc two piston 2 stroke Puch Mbike Please scan and send to savioroiz at rediffmail dot com
Thanks a Million
Fri Dec 02 2005
helijet4 at bigpond.net.au
Puch 250 SGS
hello, I would like to find a supplier of new Standard or 1st oversize pistons for a model 250 SGS
Sun Nov 27 2005
gordon at sai.co.za
1970 Puch M125
I am looking for various parts, but most urgent is the clutch pull rod with bearing and the ball nut. Can anyone point me to a dealer?
Fri Nov 18 2005
dgordner at alltel.net
1978 PUCH
I need a manual or a site to go to for reassembly of the transmission for the puch sport mk11 auto shift.
Nov 20th
I found a site on the net that has the clutch assembly breakdown for my unit. What I now need to know is what kind of oil goes in the clutch assembly when I get it back together? Don Gordner
I am trying to identify the Puch 250 on the photo. Can you help?
Do you have the year model of your motorcycle, and the engine and frame number? The bike appears very similar to a 125cc model of 1940 vintage. Ed. No specific details available yet. I think after looking
around the web, that it is a Puch 250 S4, date approx 1939, origin unknown (no details on the log book).
I attach another photo.
Thanks for your help.
Trevor
Wed Sep 21 2005
ecole at rtconnect.net
1968 Puch
Hi, I have a friend who has a 1968 Puch 250cc 2-stroke w/dual exhaust headers. Also, fully enclosed chain guard. It is black in color. Has key switch in headlight, and seperate oil and fuel cells in same tank. I am looking for any info on
it. Do I need to find a model number. If so, where might it be. Thanks
Fri Sep 16 2005
rbuttrum at autrytech dot com
parts for 1987 puch (fuel shut off valve)
I need a fuel shut off valve for my puch 1987 magnum xk
Wed Sep 07 2005
RogerBrooks at ic24.net
M50 GP
Never see any photos of this moped, registered 1976 and still runs
Tue Sep 06 2005
neil at adlow.co.za
question
I have just bought a Puch Motorcycle, last licenced pre 1961. Engin no. 1544232, 2 stroke single with twin exaust pipes. Could anyone tell me which model this could be?
Wed Aug 31 2005
agaudillat at fimatec.fr
fiche technique
Bonjour,
Je suis a la recherche du catalogue technique pour un moteur puch de 50cc ainsi que du certificats CE afin de faire homologué en france un cyclomoteur "DERNY" de construction artisanal.
D'avance merci de votre reponse
Translation:
card-index technical Hello, I am has the research of the technical catalogue for an engine puch of 50cc as well as certificates EC in order to make homologu?n France an artisanal auto-cycle "DERNY" of construction.
In advance thank you for your answer
Fri Aug 19 2005
vsaderly at hotmail dot com
1978 puch maxi
I have a friend that wants to sale this bike it is in great running order in mint condition please help. He wants to know what its worth now days.
Wed Jul 20 2005
claire.e.bailey at hants.gov.uk
Puch Maxi
Hi i am after a petrol switch for a puch maxi for my fathers beloved bike! My dad has had his bike for about 30 years and just mentioned the other day that he needed this part and has found it near impossible to get the bit so if anyone has
this lying around he will be eternally grateful!
Wed Jun 15 2005
sephiro73283 at hotmail dot com
My name is Jose Rivera and im looking for a gas tank Im looking for a gas tank and cap of Punch 1965 2cilinder{149cc}, if you have it please contact.
8th June 2005
1966 Sears Puch Sabre 49cc on Ebay
Vendor Desc: Features a 49CC Fan-Cooled 2 Cycle Engine. 3 speed Transmission with clutch.
Fri Jun 03 2005
gaupne at aol dot com
Puch repair in my area
Do you know where I can get my 1978 Puch repaired in either the Sacramento, Modesto Ca, or Reno, Nv areas?
Sat Jun 04 2005
chris.simmons at numatics.co.uk
1972 Puch MS50d
I need a inner speedo cable for a 1972 model MS50d puch.
Tue May 31 2005
mazakmike2004 at yahoo dot com
1979 puch
i am looking for a coil for a 1979 puch.
Wed May 18 2005
savioroiz at rediffmail dot com
Puch 175cc Motorbike
Sir! I do have 175cc Two stroke 1962 Model MOTORBIKE. I am looking for Electrical Drawing. Please. Thanks Savio
Wed Apr 20 2005
ptkgresford at yahoo dot com
Puch 125M 2-stroke motorcycle
Since 1975 I have owned a Puch 125M motorcycle reg in UK 1969. Since 1979 it has has little use and was last ridden on the road in 1986. It still runs and everything works. Is it possible to estimate its value? Anyone interested in buying
it?
27th May 05
Hi guys - I thought I'd e-mail every1 who had displayed interest in the 125m motorcycle. The bike is in the UK - I'll send a photo later.Any1 know its value?
Somewhere Ive got a handbook for the 125 but i cant find it at the moment.
Savio needs a wiring diagram and advice on engine rebuilds if any1 can help.
I'll pass on any info I get,
Have a nice day - take care - peter k
Date: Sat, 16 Apr 2005
subject: repairing Pete's Puch
Email: pntrpete at hotmail dot com
message: Pete Faber- I'm in Fredericksburg, Virginia, United States of America. I need to fix my small Puch. I need one part (round cable holder to handle). Know any businesses near me who do repair/service? Thank
you. Mail to Snell Rural Station,
Spotsylvania, VA 22553
Date: Sun, 03 Apr 2005
subject: Puch magnum - owners
Email: mokun at blueyonder.co.uk
message: hi, can I move a puch maxi engine into a puch magnum frame and connect up ? they are both 50cc engines I think. also anyone know of a puch magnum web page anywhere ?
Date: Sat, 02 Apr 2005
subject: puch quad
Email: tigershark25 at optusnet.com.au
message: I have a 50cc puch quad, it has broken the cog from the kick down to the motor.Can you help me find a replacement.
Les
Date: Wed, 09 Mar 2005
subject: Puch Parts
Email: teteko2001 at yahoo.co.nz
message: I am looking for a piston and barrel for a 1961 Puch. Grateful for any help. Graeme
Date: Tue, 08 Mar 2005
subject: puch murray gas tank
Email: gglenn85 at vt.edu
message: im lookin for a early 1980's puch murray gas tank.
Date: Wed, 02 Mar 2005
subject: In Need of info please
Email: gypsykat at sbcglobal.net
message: hello my name is catherine and my friend has a puch all he knows on this bike is the engine number and the model he would like to know what year it is and if there is anyway he can get an manual on this bike engine # 1729202 model#
81094222 steyr-daimler puch i would appreciate your help on this hope to hear from you soon
Date: Wed, 23 Feb 2005
subject: hi
Email: cero-cool-us at yahoo.com
message: i have a motorcycle puch i don´t know of model, i have paper of 1952 i need information of electrical system, and i like sale.
Yamill Gonzalez
Costa Rica
Date: Mon, 07 Feb 2005
subject: moped
Email: finecwby at yahoo.com
message: I have a Steyr-Daimler-Puch AG from Austria, Mfg date of 02/77. Serial #8604115. Need manual or any info you have to get this this running. Thank you.
February 10, 2003
Hello there, I am trying to find parts or any information about this bike, I send a picture of it to another w-site and they told me that it was a PUCH, but the motorcycke itself has 3 different logos. On the front of the frame there is a
logo with a big " H " and right underneath on small letters says Nurnburgen, although on the fuel tank and the rear fender there are logos with a big " P " and right underneath says Nurnburgen, but that's not it on the side of the engine
says " JLO So here is a picture of it. I hope that you guys can help me. -- LUCCI45 at MSN dot com
February 4, 2003
I was just given a Puch JC Penney Pinto that's been sitting dead in a barn since '85. If I find the serial number, how can i use it to determine it's age so i can get a shop manual to get it running? I've never ridden a moped with pedals, so what has to be done to start the engine? Is this bike identical to another Puch ped from the same year? Thanks -- Brandon, rednek-express at yahoo dot com
February 2, 2003
I have a Steyr-Daimler-Puch AG-Graz model 810.895711...
See Sears Allstate Forum
January 2, 2003
I am restoring a 1934 Puch 500cc. If anyone can give information on parts or manuals it would help greatly in this restoration. Thank you very much. -- David -- cwodb at sprintmail dot com
December 31, 2002
Motoneta Puch mod.m 1961
Estimado Sr.
Le escribo desde cordoba Argentina porque he adquirido esta motoneta 1150 cc. y decearìa restaurarla y nesecitarìa me dijeran a donde puedo sacar datos de la misma desde ya muy agradecido mi e-mail es marcepyv at hotmail dot
com , miuchas gracias -- telecap at arnet.com.ar
Sheldon's Lame Translation:
Puch motor scooter mod.m 1961 Dear Sir, I write to you from Cordoba Argentina because I have acquired this motor scooter 1150 cc., (I don't think it is really that large?) and decided to restore it and and I need
information and specifications. Thanks in advance, -- marcepyv at hotmail dot com , miuchas thanks -- to telecap at arnet.com.ar
December 21, 2002
Hi; where I can get a manual for Puch ms 50 of 1957.also I need any information of the engine chao BORIS -- borisfm73 at yahoo dot com
December 5, 2002
Hi my name is Dan, I have had a 1968 175cc Puch sears...
See Sears Allstate Forum
November 29, 2002
We have a great running, very good appearance, and complete 1963 Puch 810.94030 moped with title. A year ago I needed to replace the headlight bulb and couldn't find one. A friend here in Seattle that owns a Vespa shop talked me into
swapping out the reflector and bulb to an updated vespa set up. It all fit well into the lens face and rim, buuuut I didn't get around to finishing it until today. Guess what, forgot the wiring setup. Does anyone have a schematic?? Once she
is wired rite, this cute lil Puch with lo-miles is going on the market. Have all the original parts for the headlight. Pam and Joe -- mnotr2ur at earthlink.net
November 28, 2002
I just bought a moped/peddle bike. The label on the frame says Murray, model #80-8320, but the engine case is stamped Puch. It has some minor surface rust but overall it looks in great shape. [800mi on the odometer] I started out to
buy a 3.5hp Briggs & Stratton engine for my daughters mini bike and ended up getting the engine, a Honda express moped [688mi] and the Puch. They were all stuffed in the back corner of some old timers very large shed. All three were
gotten for the price of a used lawn mower engine.
Now that you have heard the story here is my question. What have I got? I can't seem to find any information on this kind of Puch, can anyone help?
mark. ps my daughter doesn't want the mini bike anymore after she saw the honda. -- west.k at juno dot com
November 13, 2002
RE: Puch Dalesman
Need info on 125 trials. Anything you can offer. Late 60's. 'preciate it! -- Thanx, -- Robert Ives -- bertives at earthlink.net
November 12, 2002
Good morning, My name is Butch an I live in B.C. Canada....... I have bought a frame at a garage sale an don't know what yr, make an model it is.. I could use some Help... its a Steve Daimler Puch frame... an the serial is
810,94150... I need some help with this one...
e-mail addy is: butch-sterling-willie at shaw.ca ...... thx. Butch
November 8, 2002
We have a 1966 Puch 250cc motorcycle and wish to find a nice home for it. This Puch has been sitting outside and needs to be restored. The top part of the engine is missing, but everything else is intact. It's located in San
Rafael, CA (north of San Francisco). Please contact me at nd-grad at hotmail dot com . Thanks - John Younger
November 8, 2002
I need the blower cover for a 1954 Sears Allstate 125cc hardtail. Anybody have one?
Steve Moss -- Mossmansmp at earthlink.net
October 28, 2002
I have one of these only mine is blue. It is a 1968 model, 50cc, 4.9 HP..
See Sears Allstate Forum
October 3, 2002
I am in process of purchasing a 1967 sears poch... any help on dealers or reputable service technicians in Minneapolis area? -- Wayne Butzer -- wainiac at earthlink.net
September 30, 2002
As a youngster growing up in Europe (The Netherlands), I was given a 50cc Puch as a reward for finishing my secondary education in 1957. I just now realized how much of an impact this moped had on my life. It was, without a
doubt, the greatest thing/possession that had ever happened to me up to that point. Anyway, now that I am regressing back into my second puberty, I desperately need to get my hands on one again. Anyone, that has one for sale
(preferably west coast, USA), please contact me. I have found some on the east coast, but shipping cost always proved to be a KILLER!!!!
Anyway, thanks for your help in advance. -- Jip Woudstra -- jip at ocsnet.net
September 24, 2002
HI I'M LOOKING FOR TIRES FOR A SEARS ALLSTATE MOPED TIRE SIZE IS 23X2.25 ...
See Sears Allstate Forum
September 16, 2002
Hi, there is a place where you can get just about any part need. They might have a spec. book, or know where to get one. I called and they sent me a parts list with part numbers and cost. They have parts from 1954-1985.
Motor West, Inc.
3211 West Senator Ave.
Milwaukee, WI. 53216
414-875-8787
<f> 414-875-8791
<800-686-3897> to order parts
I have a 1959 Denfield that I have started to restore. I got a copy of a service manual from a guy in Arizona. Its a 250 twinkle, gas tank with 2 caps <oil, gas>, but I need a headlight. The one that came with it, I do not think its
the right one. Well, I gotta go have a good ride.
From DC -- DCarl38984 at aol dot com
August 31, 2002
HI, we are looking for a throttle cable for a 81' puch moped. -- shammer at hutchtel.net
August 30, 2002
Hello, I am attempting to obtain information on the Puch 50cc I own. I believe the bike is an early 1970s model. The bike is MX style and came with Firestone knobby tires which are still on the bike. I have talked to several people about
this bike any so far everyone is at a loss knowing what year, and model it is. My goal is the restore this bike to showroom condition. I have attached several photos below hoping that you may have an idea of the model and year. --
Thank you. -- Dan Meister -- DMei779928 at aol dot com
June 12, 2002
My dad pulled an old motorcycle out of the yard (yes, we live in Arkansas) that we used as kids. It's a Puch as noted on the speedometer. I don't know what year, but last license is 1974 and very used at that time. It is not a moped but a
real motorcycle. He is interested in selling it or parting it out. The kick start still kicks and actually is in good shape, considering. Can anyone help me with identifying this great bike. We had tons of fun with it. -- sophbean
at alltel.net
May 27, 2002
I have just added a Sears Sabre Steyr-Daimler-Puch model 810-895-131 to my collection of odd-ball motorcycles....
See Sears Allstate Forum
May 2, 2002
I have an old Victoria moped mod. IV 1957 in a good condition. I world like to exchange it to a Puch moped.
Dan och Gunvor -- hem.halltorp at spray.se
March 11, 2002
Can you help I'm looking for a petrol tank for the puch 50 rough rider ???????????????
dave.graham at fd-electronics.net
+44 (0)1903 717550 Direct
+44 (0)1903 734160 General
+44 (0)1903 734170 Fax
March 3, 2002
I've got a 1968 Puch 250cc motorcycle that I bought for $15.00 (U.S.)...
See Sears Allstate Forum
January 30, 2002
If my memory serves me correct, the Allstate was handles by the Simpson Sears Co. in Canada or Sears and Roebuck...
See Sears Allstate Forum
October 5, 2001
Re: Puch M125
Hi,Guys,
I rode one of these things between 1973 to ' 78. It was fast, clocked at 75mph by a police bike, handled really well, but the electrics sucked. The brake light had a two switch system, both mounted right where the crud off the road
could get them. I think the second switch cut the charge to the battery. I never kept the brake light working for more than a week. The tin boxes that passed for switches on the bars shorted out if a cloud so much as obscured the sun, so I
only ever had a headlight and tail light, and both went out if you stopped at a junction.
However, I rode it everywhere, once from Reigate, Surrey to Darlington and back over a long weekend. The gear box fell apart two weeks later. I fixed it though, and rode it for years before the main bearings went. I saw some kid in a local car park with one, and gave it to him for spares. -- User592549 at aol dot com
September 30, 2001
Anybody interested in buying this fully restored Puch M50 Sport? It's had the frame stove enameled, engine rebuilt, wheels rebuilt, seat recovered, all new chromework and loads of new genuine Puch parts fitted. Cost well over a grand in
bits and services and two years hard work. £725 no offers. brent at fielderb.fsnet.co.uk
Reference the Puch M125 I was also selling, see letter dated 22 June, that's now gone to a new home. I'm hoping that when it's restored the new owner will place 'after' pictures on this site.
October 14, 2001
Puch M50 Sport for sale. Original condition 1974 model, been stood in garage since 1981, still wearing 81 tax disc. Starts first kick, runs well. Good condition. £275. brent at fielderb.fsnet.co.uk
September 30, 2001
I have a 1966 Sears Allstate made austria steyr- daimler- puch a.g-graz model 810.94211...
See Sears Allstate Forum.
June 22, 2001
Here's a picture of a 1971 Puch M125 that I wish to sell. It has been stood in a garage since 1980, is all in one piece and the engine turns over. I want £160 for it. I am in Bedfordshire in the UK. -- Brent Fiedler
-- E-mail me at brent at fielderb.fsnet.co.uk Sold
Posted in the 1970s gallery.
May 10, 2001
Do you know any info about Puch factory, do they have their own pages? -- Kai, Finland -- karjalainen.kai at willis-motors.inet.fi
New Mailing List:
It's called: Allstate Puch Motorcycle List (APML). Here's all the info:
List Info: http://www.topica.com/lists/allstatepuch
To subscribe: allstatepuch-subscribe at topica dot com
To unsubscribe: allstatepuch-unsubscribe at topica dot com
Posting Address: allstatepuch at topica dot com
From Harry McCarthy -- Harrytee at webtv.net
June 22, 2000
Puch
The filial of the Austrian maker, its moped factory is the Suzuki factory in Spain today, but its motorcycles and name were bought out by Motovespa, which I don't think uses the name anymore. -- Juan Carlos Castillo --
jccastillo at cfu.net
May 10, 2000
Hi, some lovely pics of Italian bikes you will find at www.puchtr.com [No DNS] , Gallery 4. The site is for all Steyr Puch freaks, but we love some 50ccm bikes to. Come and visit us. -- webmaster at puchtr dot com
March 19, 1999
I noticed that someone had posted an inquiry about an Allstate bike and was wondering if I could do the same. I recently picked up a two cylinder, flathead Allstate in northern California. It has the number 717071 stamped on
the left side of the case. I am looking for anyone with knowledge or sources of literature concerning Allstates or Puch bikes.
Scott Baxter -- sbaxter at keasac dot com
Sacramento, CA
